Evaporation plants – falling film and vacuum evaporators
We design and build evaporation plants that turn industrial wastewater, process baths, acids, solvents and food liquids into a clean distillate and a reusable or disposable concentrate. Most plants run under vacuum: the boiling point drops, products are treated gently, corrosion slows down and low-grade heat can be used.
Every plant is engineered for one liquid – yours. We size it on data from our pilot plant, select the evaporator type and materials for your medium, and deliver the complete unit including vacuum system, condensation, controls and commissioning on site.
Evaporator plant types we build
| Plant type | Typical use | Notes |
| Falling film evaporator | clean, low-viscosity and heat-sensitive liquids; large capacities | heating surfaces above 500 m²; combines with MVR or TVR |
| Forced circulation evaporator | fouling, crust-forming, crystallizing or viscous liquids; acid concentration | evaporation by flashing in the separator keeps tubes clean |
| Natural circulation evaporator | clean liquids of normal viscosity; reboilers | no circulation pump needed |
| Multi-effect and vapor recompression (MVR/TVR) | high water loads where steam costs matter | TVR saves 30–50 % steam; MVR runs on electric power |
| Thin film evaporator | viscous or solids-laden products, high boilers | up to 40,000 mPa·s and 400 °C – see Evaporation technology |
| Heat pump evaporator | aqueous wastewater without steam or cooling water | see Heat pump evaporator |
Not sure which type fits? The comparison and energy figures are on our Evaporation technology page – or send us your analysis.
Vacuum evaporators for corrosive media
For acids and aggressive solutions we build heat exchangers, separators and piping in graphite, SiC, tantalum, titanium, Hastelloy or PFA-lined steel. Vacuum operation keeps temperatures – and corrosion – low. Typical tasks: concentrating sulfuric acid, recovering hydrochloric acid, reducing metal-bearing process solutions. More on Special materials and Acid regeneration.
What we deliver
- process design based on your analysis or a pilot test
- evaporator, separator, condenser and vacuum system
- equipment from specialized manufacturers, selected per medium
- controls and automation
- delivery worldwide, installation supervision and commissioning on site
Reference plants (selection, anonymized)
| Industry | Liquid | Plant type | Size range | Materials |
| Starch / food | process liquid | falling film | feed 30–45 t/h | duplex stainless steel |
| Battery materials | cobalt chloride solution | falling film | feed approx. 2.5 t/h | graphite, titanium, Hastelloy |
| Metal refining | copper electrolyte with nickel sulfate, sulfuric acid up to approx. 1,000 g/l | forced circulation | evaporation approx. 1.2 t/h | Hastelloy, stainless steel |
| Glass industry | sulfuric acid 41 → 85 % with HF | forced circulation | distillate approx. 140 l/h | PTFE-lined steel, graphite, PFA |
| Aluminum surface treatment | nitric acid / aluminum nitrate solution | forced circulation | feed up to 800 l/h | 316L, PVDF, PP |
| Chemicals | sodium hydrosulfide 43 → 60 %, heated with waste heat | forced circulation | – | – |
| Used oil re-refining | used oil | falling film | feed up to approx. 40 t/h | 16Mo3 |
Test first, then build
We have carried out more than 120 test campaigns in our pilot plant and testing laboratory. With your sample we determine the evaporator type, the achievable concentration and the distillate quality – the basis for design and performance guarantee. See Testing laboratory.
Frequently asked questions
What is a falling film evaporator used for? For clean, low-viscosity and heat-sensitive liquids. The liquid flows as a thin film down vertical tubes – short residence time, no superheating, large capacities.
When do I need a forced circulation evaporator? When the liquid fouls, forms crusts or crystallizes. The product is heated under slight overpressure and only flashes in the separator, so heating surfaces stay largely free of deposits.
Why evaporate under vacuum? The boiling point drops. That protects heat-sensitive products, reduces corrosion and allows waste heat, MVR or a heat pump as energy source.
Can you build evaporators for acids? Yes – in graphite, SiC, tantalum, titanium, Hastelloy or PFA-lined steel, depending on the acid and temperature.
Do you deliver complete plants? Yes – from pilot test and design to equipment, controls, delivery worldwide and commissioning on site.
Send us your analysis or a sample – Inquiry form · Contact
Further reading: Evaporation technology · Distillation columns · Crystallizers · Heat pump evaporator · Zero Liquid Discharge · Acid regeneration · Special materials · Testing laboratory